Installing The Software - Ricoh SP 210 Setup Manual

2. Installing the Software

Checking the available connection
SP 210/SP 210SU/SP 210SF/
SP 211/SP 211SU/SP 211SF
USB Available
Ethernet Not available
Wi-Fi Not available
• USB
To install the software over a USB connection, a USB cable and the supplied CD‑ROM are required.
• Ethernet
• To install the software over a network connection, a network cable and the supplied CD‑ROM are
required.
• To automatically obtain the IP address, a router with a built‑in DHCP server is required.
• Ethernet and wireless LAN settings cannot be enabled at the same time.
• Wi‑Fi
• To connect to the network via wireless LAN, see Wi‑Fi Settings Guide.
• To automatically obtain the IP address, a router with a built‑in DHCP server is required.
• Ethernet and wireless LAN settings cannot be enabled at the same time.
• If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw, first connect the machine and
computer via a USB cable, install Smart Organizing Monitor only, and then configure the Wi‑Fi set‑
tings. Next, connect the machine to the network, and then install the printer driver only.
SP 212w/SP 212SUw/
SP 212SFw/SP 213w/
SP 213SUw/SP 213SFw
Available
Not available
Available
7
SP 212Nw/SP 212SNw/
SP 212SFNw/SP 213Nw/
SP 213SNw/SP 213SFNw
Available
Available
Available