Ricoh SP 210 Setup Manual page 20

Configuring the Machine's IPv4 Address Manually
Press the [User Tools] key.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [OK] key.
Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.
Enter the machine's IPv4 address using the number keys.
Press the [ ] or [ ] key to move between fields.
Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the network environ‑
ment.
Press the [User Tools] key to restart the machine.
The specified setting is applied.
• For details about configuring the IPv6 address, see the User Guide
• You cannot configure the network settings while the machine is operating (printing, receiving a fax, etc.).
Correspondingly, the machine cannot receive print jobs and faxes while the network settings are being con‑
figured (after clicking [Network Settings]).
.
20