Table of Contents
Advertisement
TRENDnet User's Guide
Check this box if your service provider requires a
Enable SSL:
SSL secured connection.
Attach Image/Interval: Check Attach Image if you want to send a snapshot
image with the email notification and select the
interval of snapshots in seconds.
Authentication: Check this box if your server requires a password in
order to send email. Most email servers require
authentication when sending an email.
User name: Enter the user name of outgoing email account
Password: Enter the password
Confirm: Enter the password again to confirm that the
password was entered correctly.
Click Save to save the changes
Receiver
Receiver 1: The first receiver's name.
Receiver 1's Address: The first receiver's email address.
Receiver 2: The second receiver's name.
Receiver 2's Address: The second receiver's email address.
Receiver 3: The third receiver's name.
Click Save to save the changes
* Many ISPs do not allow service port 25 going through their network. Other popular
ports are 587 and 465. Please consult your email service provider and ISP for details.
© Copyright 2014 TRENDnet. All Rights Reserved.
Storage
Storage Management
* Micro SD card or Network storage device must be setup / formatted before it can be
managed / stored. Camera will save to SD card only when there is no additional NAS
device setup.
*Micro SD slot is located at the opposite side of the lens under a protective black strip.
(Please make sure the environment is dry and clean when opening the dome cover)
Network Storage
* Network Storage must be setup before it can be managed. For storage management,
please refer to the next section.
The camera supports two formats of network storage file systems: NFS and SMB/CIFS.
NFS, Network File System, is natively supported by Linux computers and most NAS,
Network Attached Storage. SMB/CIFS, Common Internet File System, is natively
supported by Windows® systems and now is generally supported by Linux and OS X®.
You can add up to 8 network storages for your camera. The recordings will subsequently
be stored in these spaces. Save video from the first storage and then the next when the
first one is full. Click on the entry to change the settings and click Save to save the settings.
TV‐IP450PI
42
Advertisement
Table of Contents
