TRENDnet User's Guide
Arming Schedule
Edit:
Click Edit to define when you want the tamper
detection works.
© Copyright 2014 TRENDnet. All Rights Reserved.
Notification
Send Email:
Click Save to save the changes
1. Select the day of the week you want to edit
the schedule.
2. Set the time period you want to enable
tamper detection. (Default is 0‐24 hours, all
day).
3. Click Copy to Week if you want the same
daily schedule every day. Or, you can select
other day of the week and click Copy to copy
the schedule of the day to other days.
4. Select another day of the week by clicking on
its tab to set the next schedule. Click OK
when you have finished your settings.
Check this box to send an e‐mail notification when
motion is detected. Go to Events / Email to setup
email account information.
TV‐IP450PI
39