TRENDnet User's Guide
Network Settings
TCP/IP
Setup your basic IPv4 and IPv6 network settings on this page.
© Copyright 2014 TRENDnet. All Rights Reserved.
Network interface
MAC Address: Click this button to reboot this camera.
Duplex and Speed: Choose one of the Ethernet duplex and speed to
Primary DNS: Enter your first IPv4 or IPv6 DNS server address
Secondary DNS: Enter your second IPv4 or IPv6 DNS server address
IPv4
IPv4 Address:
Subnet Mask:
Default Gateway:
Multicast Address:
IPv6
IPv6 Mode:
IPv6 Address:
Prefix Length:
Default Gateway:
Click Save to save the changes
match your network. Default: auto.
MTU: Maximum transmission unit. The maximum byte
size Ethernet data field.
DHCP:
Check this box if the IP address is assigned by DHCP
server.
Load complete factory default to the camera.
Network range of the subnet
The default route going further from camera IPv4
subnet.
Multicast address for video streaming.
Choose Manual, DHCP, or Route Advertisement.
Click View Route Advertisement to find a route
advertisement.
IPv6 address of the camera.
Length of network prefix
The default route going further from camera IPv6
subnet.
TV‐IP450PI
23