Table of Contents
Advertisement
TRENDnet User's Guide
SNMP V1/V2
Enable SNMPv1: Check this box to enable SNMP v1 management.
Enable SNMPv2c: Check this box to enable SNMP v2c management.
Read SNMP Community: Specify the password for access the SNMP
community for read only access
Write SNMP Community: Specify the password for access to the SNMP
community with read/write access
Trap Address: Specify the IP address for the SNMP trap community
Trap Port: Specify the port number for the SNMP trap
community
Trap Community: Specify the name of SNMP trap community
SNMP V3
Enable SNMPv3: Check this box to enable SNMP v3 management.
Read User Name: SNMP v3 member user name
Security Level: Choose one of the security levels.
Authentication Algorithm: Choose the authentication method to verify the
source of information: MD5 or SHA.
Authentication Password: Specify the authentication password between 8 to
32 letters.
Private‐key Algorithm: Choose the privacy key to encrypt SNMP messages:
DES or AES.
Private‐key Password: Specify the privacy key between 8 to 32 letters.
Write User Name: SNMP v3 manager user name
Security Level: Choose one of the security levels.
Authentication Algorithm: Choose the authentication method to verify the
source of information: MD5 or SHA.
Authentication Password: Specify the authentication password between 8 to
32 letters.
© Copyright 2014 TRENDnet. All Rights Reserved.
Private‐key Algorithm:
Choose the privacy key to encrypt SNMP messages:
DES or AES.
Private‐key Password:
Specify the privacy key between 8 to 32 letters.
SNMP Other Settings
SNMP Port:
SNMP service port number.
Click Save to save the changes
TV‐IP450PI
26
Advertisement
Table of Contents
