Table of Contents
Advertisement
TRENDnet User's Guide
The status bar shows the status you are at, including
Status Bar
enabled the zoom, recording video, and successfully
taking a snapshot
The icon expands the PTZ control panel
Pan / Tilt / Zoom control panel
Presets
Use the presets panel to move to previously saved
locations
Presets
Configure a Preset position
A preset is a predefined image position. For the defined preset, you can click the Call
button to quickly view the desired image position.
1. In the PTZ control panel, select a preset number from the preset list.
© Copyright 2014 TRENDnet. All Rights Reserved.
Zoom in / out
Focus close / far
Iris open / close
Speed of pan/tile movement
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
to delete the preset. You can configure up to 256 presets.
TV‐IP450PI
11
Advertisement
Table of Contents
