Table of Contents
Advertisement
TRENDnet User's Guide
Arming Schedule
Edit: Click Edit to define when you want the motion
detection works.
© Copyright 2014 TRENDnet. All Rights Reserved.
Notification
Upload Snapshot:
1. Select day of the week you want to edit the
schedule.
2. Set the time period you want to enable
motion detection. (Default is 0‐24 hours, all
day).
3. Click Copy to Week if you want the same
daily schedule every day or you can select
other day of the week and click Copy to copy
the schedule of the day to other days.
4. Select another day of the week by clicking on
its tab to set next schedule. Click OK when
you finished your setting.
Send Email:
Check this box to send an e‐mail notification when
motion is detected. Go to Events / Email to setup
email account information.
Check this box to send snapshots to an FTP server or
configured Network Storage when motion is
detected. Go to Network Storage or FTP to setup
server information
TV‐IP450PI
37
Advertisement
Table of Contents
