TRENDnet User's Guide
Fluorescent Lamp:
You can select this mode when there are fluorescent
lamps installed near the speed dome.
Sodium Lamp:
You can select this mode when there are sodium
lamps installed near the speed dome.
Auto‐Track:
White balance is continuously being adjusted in real‐
time according to the color temperature of the scene
illumination.
:
Enable or disable noise reduction.
Digital Noise Reduction
Noise Reduction Level: Adjust the effect of digital
noise reduction. Range: 0‐100%, default : 100%
Zoom Limit
:
You can set Zoom Limit value to limit the maximum
value of zooming. The value can be set to 20, 40, 80,
160 and 320.
HLC: HLC (High Light Compensation) makes the camera
identify and suppress the strong light sources that
usually flare across a scene. This makes it possible to
see the detail of the image that would normally be
hidden.
IR Light Mode: Auto: The brightness of the infrared light will be
adjusted automatically.
Manual: you need to adjust the brightness value of
infrared light manually. IR Light Sensitivity value
ranges from 0 to 100.
Note:
When IR Light Mode is set to auto, the day/night mode is adjusted
automatically according to the IR Light Mode. Manually setting the day/night
mode is invalid.
When IR Light Mode is set to manual and the IR Light Bright is 0, you can set
the day/night mode manually.
© Copyright 2014 TRENDnet. All Rights Reserved.
When IR Light Mode is set to manual and the IR Light Bright is not 0, night
mode is set as the default mode. Manually setting the day/night mode is
invalid.
TV‐IP450PI
33