TRENDnet User's Guide
Pattern
A pattern is a memorized series of pan, tilt, zoom, and preset functions. A pattern can
be called in the pattern settings interface. There are up to 4 patterns available for
customization.
Configure a Pattern
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Error! Reference source not
found..
Patterns Settings Interface
3. Click
to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of PROGRAM PATTERN REMAINNING MENORY (%).
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
© Copyright 2014 TRENDnet. All Rights Reserved.
to enter the pattern settings interface.
5. Click
to save the pattern settings.
Buttons on the Patterns interface:
Buttons
These 4 patterns can be operated separately and with no priority level.
When configuring and calling the pattern, proportional pan is valid; the limit stops
and auto flip will be invalid; and the 3D positioning operation is not supported.
TV‐IP450PI
Description
Start recording a pattern.
Stop recording a pattern.
Call the current pattern.
Stop the current pattern.
Delete the current pattern.
14