TRENDnet User's Guide
Patrols
A patrol is a memorized series of preset functions. It can be configured and called on the
patrol settings interface. There are up to 8 patrol available for customization. A patrol
can be configured with 32 presets.
Configure a Patrol route
1. In the PTZ control panel, click
2. Select a patrol number from
Click
to add a preset to a patrol path.
3. Configure the preset number, patrol time and patrol speed.
Name
Description
Patrol
This is the duration the camera stays on one patrol point. The speed
Time
dome moves to another patrol point after the patrol time.
Patrol
This is the speed that the camera moves in between patrol points.
Speed
4. Click
to save a preset into the patrol.
© Copyright 2014 TRENDnet. All Rights Reserved.
to enter the patrol settings interface.
.
5. Repeat the steps from 3 to 5 to add more presets.
6. Click
to save all the patrol settings.
Calling a Patrol route
In the PTZ control panel, select a defined patrol from
to call the patrol.
Buttons on the Patrol interface:
Buttons
Description
Save a patrol
Call a patrol
Stop a patrol
Add a preset to a patrol path
Modify a preset
Delete a preset
Delete all the presets in the selected patrol path
TV‐IP450PI
and click
13