TRENDnet TV?IP450PI User Manual page 13

TRENDnet User's Guide
Calling a Preset position
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
The following presets are predefined with special commands. You can only call them
but not configure them. For instance, preset 99 is "Start auto scan". If you call preset
99, the speed dome starts auto scan function.
Special
Function
Preset
33 Auto flip
34 Back to initial position
35 Call patrol 1
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
39 IR cut filter in
40 IR cut filter out
41 Call pattern 1
© Copyright 2014 TRENDnet. All Rights Reserved.
Special
Function
Preset
93 Set limit stops manually
94 Remote reboot
96 Stop a scan
97 Start random scan
98 Start frame scan
99 Start auto scan
100 Start tilt scan
101 Start panorama scan
102 Call patrol 5
42 Call pattern 2
43 Call pattern 3
44 Call pattern 4
45 One‐touch patrol
92 Start to set limit stops
Note: When you call preset 45 (one‐touch patrol), the speed dome patrols from
presets 1 to 32. Before you enable this function, please set presets 1 to 32 first.
TV‐IP450PI
103 Call patrol 6
104 Call patrol 7
105 Call patrol 8
12