TRENDnet User's Guide
software and OSD, On Screen Display. The default is
the camera's model name:
Location: Label where you installed this camera
Authentication
RTSP: Camera's video stream can be accessed with RTSP,
Real Time Streaming Protocol. Only the
administrator and users can view this video stream.
Un‐checking this box will allow everyone access to
this video stream without authentication. Default:
checked.
HTTP: Camera can be accessed via password protected
web management interface. Un‐checking this box
will allow anyone to access this camera and change
its settings.
© Copyright 2014 TRENDnet. All Rights Reserved.
User Accounts
You can setup up to 16 user accounts to access the camera's video stream with a web
browser or real time video stream (RTSP). Only one administrator account can be setup
to configure the camera and cannot be deleted.
User Accounts
Add: Click Add button to add one user account
Modify: To change a user's name and password, highlight the
user by clicking on it. Then, click Modify button. You
can change the user's name and password. You can
also change the administrator's password here. But,
the administrator's name is fixed, you cannot change
that.
Click OK to save the changes.
TV‐IP450PI
19