Answering system
Answering system settings
Remote access code
To access your answering system remotely from any
touch-tone phone, you need to enter a two-digit number
(00-99). By default, the remote access code is 19.
To change the remote access code:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode,
press MENU/
2. Press q
or p
CID
press
/SELECT.
MENU
3. Press q
or p
CID
press
/SELECT.
MENU
4. Press q
or p
CID
/SELECT.
MENU
5. Use the dialing keys to enter a
/DELETE on the handset or X/DELETE on the
MUTE
telephone base to backspace and delete a digit.
6. Press
/SELECT to save the setting. You hear a
MENU
confirmation tone.
to enter the main menu.
SELECT
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Remote code, then press
DIR
two-digit number. Press
81
Play messages
>Answering sys
p
q
Answer ON/OFF
>Ans sys setup
p
q
REMOTE CODE
19
Play messages
>Answering sys
p
q
Answer ON/OFF
>Ans sys setup
p
q
REMOTE CODE
19