Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access code
is 19.
To change the remote access code:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q
or p
CID
/�ELECT.
MENU
3. Press q
or p
CID
press
/�ELECT.
MENU
4. Press q
or p
CID
/�ELECT.
MENU
5. Use the dialing keys to enter a two-digit number. Press
/DELETE to backspace and delete a digit.
MUTE
6. Press
/�ELECT to save the setting. You hear a
MENU
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
�ELECT
2. Press q
or p
CID
/�ELECT.
press
MENU
3. Press q
or p
CID
press
/�ELECT.
MENU
4. Press q
or p
CID
press
/�ELECT.
MENU
5. Use the dialing keys to enter a two-digit number. Press
X/DELETE to backspace and delete a digit.
/�ELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
to scroll to Answering sys, then press
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Remote code, then press
DIR
to enter the main menu.
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Remote code, then
DIR
�ELECT
83
to
Answer ON/OFF
>Ans sys setup
# of rings
>Remote code
REMOTE CODE
Voice guide
>Ans sys setup
# of rings
>Remote code
REMOTE CODE
19
p
q
p
q
19