Telephone settings
Handset settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps below to turn the
CID time sync feature on or off. The default setting is On.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press
or
q
CID
/SELECT.
MENU
3. Press
q
or
CID
/SELECT.
MENU
4. Press
q
or
CID
/SELECT to save. There is a confirmation tone and the
MENU
screen returns to the previous menu.
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial ten digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press MENU/
2. Use
q
or
CID
/SELECT.
MENU
3. Use
or
q
CID
/SELECT. The screen briefly shows
MENU
Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area code.
•
Press
MUTE
•
Press and hold
/SELECT to save. There is a confirmation tone
5. Press
MENU
and the screen shows Area code will not show in CID
briefly before returning to the previous menu.
to scroll to Settings, then press
p
DIR
p
to scroll to CID time sync, then press
DIR
to highlight On or Off, then press
p
DIR
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
p
DIR
to scroll to Home area code, then press
p
DIR
/DELETE to delete a digit.
/DELETE to delete all digits.
MUTE
SELECT
21
to
Key tone
>CID time sync
p
q
CID TIME SYNC
>On
p
q
CID time sync
>Home area code
p
q
HOME AREA CODE
___