Handset Alert Tones; Telephone Base Alert Tones - AT&T CL83203 Complete User's Manual

Appendix
Alert tones and lights

Handset alert tones

One short beep
One long beep
Two short beeps
Confirmation tone
(three rising tones)
Four beeps
Four short beeps

Telephone base alert tones

One short beep
One long beep
Two short beeps
Confirmation tone
(three rising tones)
Four beeps
Four short beeps
Beeps every
ten seconds
Tone of each key press, if key tone is turned on.
Indication to begin recording a message, memo or announcement.
You are pressing qCID or pDIR on a cordless handset when the
volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
The system has completed the command successfully.
The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call.
Low battery warning.
Tone of each key press, if key tone is turned on.
Indication to begin recording a message, memo or announcement.
Indicates the start of message recording during call screening or
the end of a message playback session.
You are pressing q/VOLUME/p on the telephone base when the
volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
-OR-
Registration slots are full.
The system has completed the command successfully.
The other party has ended your intercom call.
Registration failure tone.
Message alert.
101