Call Screening - AT&T CL83203 Complete User's Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages
can be heard over the speaker when they are being
recorded. If you turn call screening on, you hear the
incoming message. While monitoring an incoming message,
you can answer the call by pressing
/SPEA�ER SPEA�ER on the handset, or
telephone base.
To change the setting:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode,
press MENU/
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
press /SELECT.
MENU
/SELECT to select Call screening.
4. Press
MENU
5. Press q or p
CID
6. Press /SELECT to save the setting. You hear a
MENU
confirmation tone.
NOTE: For more information on call screening, see page 86.
to enter the main menu.
SELECT
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to choose On or Off.
DIR
PHONE/
FLASH
/SPEA�ER SPEA�ER on the
79
Answer ON/OFF
>Ans sys setup
or
Call screening
>
# of rings
CALL SCREENING
>On
Answer ON/OFF
>Ans sys setup
p
q
Call screening
>
# of rings
p
q
CALL SCREENING
>On
p
q
p
q
p
q
p
q