AT&T CL83203 Complete User's Manual page 82

Answering system
Answering system settings
To record a new outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
main menu.
2. Press q or p
CID
3. Press /SELECT again to select Announcement.
MENU
4. Press /SELECT to select Record annc. The system
MENU
announces, "Record after the tone. Press 5 when you are
done."
5. Speak towards the handset to record your announcement.
Press 5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
/SELECT.
MENU
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
SELECT
2. Press q or p
CID
/SELECT.
press
MENU
/SELECT again to select Announcement.
3. Press
MENU
4. Scroll to Record annc and press
"Record after the tone. Press 5 when you are done."
5. Speak towards the telephone base to record your announcement. Press 5
to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll
to Play annc and press
-OR-
1. When the telephone base is in idle mode, press
•/RECORD.
2. Press q or p
CID
/SELECT. The system announces, "Record
press
MENU
after the tone. Press 5 when you are done."
3. Speak towards the telephone base to record your
announcement. Press 5 to end recording. Your
recorded announcement plays.
to scroll to Answering sys, then press
DIR
to enter the main menu.
to scroll to Answering sys, then
DIR
/SELECT.
MENU
to scroll to Announcement and
DIR
SELECT
/SELECT. The system announces,
MENU
76
to enter the
/SELECT.
MENU
>Record annc
Play annc
p
q
Play annc
>Record annc
p
q
Record memo
>Announcement
p
q