AT&T CL83203 Complete User's Manual page 96

Answering system
Message playback
When messages are playing on the handset:
Press q /VOLUME or p
•
CID
playback volume.
• Press EQ
• Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
•
• Press /DELETE to delete the message.
MUTE
• Press 5 or
• Press /SPEA�ER SPEA�ER to switch between speakerphone mode and
handset mode.
PHONE/
• Press
then press
MENU
the caller if the caller's number is available. If the dialing format used
is not correct, then use the option below to choose the correct dialing
format before calling back the caller.
• Press /SELECT to pause playback and show the caller ID information
MENU
if available. From here, you can press
or press # (pound key) repeatedly to show the desired dialing option
(page 72), then press
call back within ten seconds, message playback resumes automatically.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
DIR
to adjust the message playback audio quality.
/CANCEL to stop the playback.
OFF
to stop playback. The screen shows Call back?,
FLASH
/SELECT, PHONE/
PHONE/
/ VOLUME to adjust the message
or
FLASH,
/CANCEL to resume playback,
OFF
to call back the caller. If you do not
FLASH
90
/SPEA�ER SPEA�ER to call back