Table of Contents
Advertisement
Answering system
Message playback
To listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
/SELECT again to select Play messages.
2. Press
MENU
If there are new and old messages, press q
•
to select Play new msgs or Play old msgs, then press
SELECT.
MENU/
•
If there are only new or only old messages, they
play automatically.
The system announces the number of messages, then
begins playback. The message sequence is shown on the
handset. If there are no recorded messages, the handset
shows No messages and you hear, "You have no message."
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
Press q/VOLUME/p to adjust the message playback volume.
•
•
Press /S�IP to skip to the next message.
/REPEAT to repeat the message. Press twice to hear the
•
Press
previous message.
•
Press X/DELETE to delete the message.
/
•
Press
PLAY
/SPEA�ER
SPEA�ER to stop playback. The screen shows Call back?, then
•
Press
press
/SELECT,
MENU
number is available. If the dialing format used is not correct, then use the
option below to choose the correct dialing format before calling back
the caller.
/SELECT to pause playback and show the caller ID information
•
Press
MENU
if available. From here, you can press
or press # (pound key) repeatedly to show the desired dialing option
(page 72), then press
call back within ten seconds, message playback resumes automatically.
/STOP to stop the playback.
or
/SPEA�ER
SPEA�ER to call back the caller if the caller's
/SPEA�ER
SPEA�ER to call back the caller. If you do not
SELECT
or p
CID
CANCEL to resume playback,
89
to
>Play new msgs
Play old msgs
p
q
ANS ON
DIR
You have:
3 New messages
will
ANS ON
Charlie Johnson
4-Repeat 6-Skip
ANS ON
MSG#
10:01
1/3
AM
Advertisement
Table of Contents
