Call Screening - AT&T CL84115 Complete User's Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages can be heard over
the speaker when they are being recorded. If you turn call screening on, you
hear the incoming message. While monitoring an incoming message, you can
answer the call by pressing �HONE/
/��EA�ER ��EA�ER or lifting the corded handset on the telephone base.
To change the setting:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
/�ELECT.
press
MENU
3. Press q or p
CID
press /�ELECT.
MENU
4. Press /�ELECT to select Call screening.
MENU
5. Press q or p
CID
6. Press /�ELECT to save the setting. You hear a
MENU
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
�ELECT
2. Press q or p
CID
press /�ELECT.
MENU
3. Press q or p
CID
press /�ELECT.
MENU
/�ELECT to select Call screening.
4. Press
MENU
5. Press q or p
CID
6. Press /�ELECT to save the setting. You hear a
MENU
confirmation tone.
NOTE: For more information on call screening, see page 87.
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to choose On or Off.
DIR
to enter the main menu.
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to choose On or Off.
DIR
on a cordless handset, or pressing
FLA�H
�ELECT
81
Answer ON/OFF
>Ans sys setup
to
Call screening
>
# of rings
CALL SCREENING
>On
Voice guide
>Ans sys setup
Call screening
>
# of rings
CALL SCREENING
>On
p
q
p
q
p
q