ZyXEL Communications P-2612HW Series User Manual page 96

Chapter 5 Status Screens
The following table describes the fields in this screen.
Table 17 Packet Statistics
LABEL
System Monitor
System up Time
Current Date/
Time
CPU Usage
Memory Usage
WAN Port Statistics
Link Status
WAN IP Address
Upstream Speed
Downstream
Speed
Rate
Node-Link
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
LAN Port Statistics
Interface
Status
TxPkts
RxPkts
Collisions
Poll Interval(s)
Set Interval
Stop
96
DESCRIPTION
This is the elapsed time the system has been up.
This field displays your ZyXEL Device's present date and time.
This field specifies the percentage of CPU utilization.
This field specifies the percentage of memory utilization.
This is the status of your WAN link.
This is the IP address of the ZyXEL Device's WAN port.
This is the upstream speed of your ZyXEL Device DSL interface.
This is the downstream speed of your ZyXEL Device DSL interface.
This is the port speed and duplex setting of your Ethernet WAN
connection.
This field displays the remote node index number and link type. Link
types are Ethernet and PPPoE.
This field displays Down (line is down), Up (line is up or connected) if
you're using Ethernet encapsulation and Down (line is down), Up
(line is up or connected), Idle (line (ppp) idle), Dial (starting to
trigger a call) and Drop (dropping a call) if you're using PPPoE
encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This field displays Ethernet (LAN ports).
This displays the port speed and duplex setting.
This field displays the number of packets transmitted on this interface.
This field displays the number of packets received on this interface.
This is the number of collisions on this interfaces.
Type the time interval for the browser to refresh system statistics.
Click this to apply the new poll interval you entered in the Poll
Interval field above.
Click this button to halt the refreshing of the system statistics.
P-2612HW Series User's Guide