Voice; Chapter 10 Voice; Overview; What You Can Do In The Voip Screens - ZyXEL Communications P-2612HW Series User Manual

C
H A P T E R

10.1 Overview

Use this chapter to:
• Connect an analog phone to the ZyXEL Device.
• Make phone calls over the Internet, as well as the regular phone network.
• Configure settings such as speed dial and distinctive ringing.
• Configure network settings to optimize the voice quality of your phone calls.

10.1.1 What You Can Do in the VoIP Screens

These screens allow you to configure your ZyXEL Device to make phone calls over
the Internet and your regular phone line, and to set up the phones you connect to
the ZyXEL Device.
• Use the SIP Settings screen
about your SIP account.
• Use the SIP QoS screen
Service for VoIP calls. QoS can give VoIP traffic higher priority on the network so
it gets dealt with more quickly.
• Use the Analog Phone screen
accounts the phones connected to the ZyXEL Device use.
• Use the Advanced Analog Phone Setup screen
configure audio settings such as volume levels for the phones connected to the
ZyXEL Device.
• Use the EXT. Table screen
numbers for the phones connected to the ZyXEL Device so they can be
separately identified for intercom use.
• Use the Common Phone Settings screen
immediate dialing on or off.
• Use the Region screen
depend on the country you are in.
• Use the Speed Dial screen
dialing frequently-used (VoIP) phone numbers.
P-2612HW Series User's Guide
(Section 10.2 on page
(Section 10.4 on page
(Section 10.5 on page
(Section 10.7 on page
(Section 10.8 on page
(Section 10.9 on page 199) to change settings that
(Section 10.10 on page
10

Voice

187) to set up information
193) to configure Quality of
194) to control which SIP
(Section 10.6 on page
197) to configure extension
198) to turn
200) to set up shortcuts for
194) to
185