ZyXEL Communications P-2612HW Series User Manual page 188

Chapter 10 Voice
Use this screen to maintain basic information about each SIP account. You can
also enable and disable each SIP account. To access this screen, click VoIP > SIP
> SIP Settings.
Figure 119 VoIP > SIP > SIP Settings
Each field is described in the following table.
Table 52 VoIP > SIP > SIP Settings
LABEL
SIP Account
SIP Settings
Active SIP
Account
Number
SIP Local Port
SIP Server
Address
SIP Server Port
188
DESCRIPTION
Select the SIP account you want to see in this screen. If you change this
field, the screen automatically refreshes.
Select this if you want the ZyXEL Device to use this account. Clear it if
you do not want the ZyXEL Device to use this account.
Enter your SIP number. In the full SIP URI, this is the part before the @
symbol. You can use up to 127 printable ASCII characters.
Enter the ZyXEL Device's listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP server provided by
your VoIP service provider. You can use up to 95 printable ASCII
characters. It does not matter whether the SIP server is a proxy,
redirect or register server.
Enter the SIP server's listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
P-2612HW Series User's Guide