ZyXEL Communications P-2612HW Series User Manual page 85

Go to the Status screen to check if your SIP account has been registered
3
successfully. If registration failed, check your Internet connection and click
Register to register your SIP account again.
Figure 65 Tutorial Example: Status
4.5.1.2 Analog Phone Configuration
Click VoIP > Phone to open the Analog Phone screen.
1
Select Phone1 to configure the first phone port.
2
Select SIP1 from the SIP Account drop-down list box in the Outgoing Call Use
3
section to have the phone (connected to the first phone port) use the registered
SIP1 account to make outgoing calls.
Select the SIP1 check box in the Incoming Call apply to section to have the
4
phone (connected to the first phone port) receive phone calls for the SIP1
account.
P-2612HW Series User's Guide
Chapter 4 Tutorial
85