ZyXEL Communications P-2612HW Series User Manual page 204

Chapter 10 Voice
Table 62 Phone Book > Incoming Call Policy
LABEL
Busy Forward to
Number
No Answer
Forward to
Number
No Answer
Waiting Time
Advanced Setup The ZyXEL Device checks these rules after it checks the rules in the
#
Activate
Incoming Call
Number
Forward to
Number
Condition
Apply
Cancel
204
DESCRIPTION
Select this if you want the ZyXEL Device to forward incoming calls to
the specified phone number if the phone port is busy. Specify the phone
number in the field on the right. If you have call waiting, the incoming
call is forwarded to the specified phone number if you reject or ignore
the second incoming call.
Select this if you want the ZyXEL Device to forward incoming calls to
the specified phone number if the call is unanswered. (See No Answer
Waiting Time.) Specify the phone number in the field on the right.
This field is used by the No Answer Forward to Number feature and
No Answer conditions below.
Enter the number of seconds the ZyXEL Device should wait for you to
answer an incoming call before it considers the call is unanswered.
Forward to Number Setup section.
This field is a sequential value, and it is not associated with a specific
rule. The sequence is important, however. The ZyXEL Device checks
each rule in order, and it only follows the first one that applies.
Select this to enable this rule. Clear this to disable this rule.
Enter the phone number to which this rule applies.
Enter the phone number to which you want to forward incoming calls
from the Incoming Call Number. You may leave this field blank,
depending on the Condition.
Select the situations in which you want to forward incoming calls from
the Incoming Call Number, or select an alternative action.
Unconditional - The ZyXEL Device immediately forwards any calls
from the Incoming Call Number to the Forward to Number.
Busy - The ZyXEL Device forwards any calls from the Incoming Call
Number to the Forward to Number when your SIP account already
has a call connected.
No Answer - The ZyXEL Device forwards any calls from the Incoming
Call Number to the Forward to Number when the call is unanswered.
(See No Answer Waiting Time.)
Block - The ZyXEL Device rejects calls from the Incoming Call
Number.
Accept - The ZyXEL Device allows calls from the Incoming Call
Number. You might create a rule with this condition if you do not want
incoming calls from someone to be forwarded by rules in the Forward
to Number section.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2612HW Series User's Guide