ZyXEL Communications P-2612HW Series User Manual page 155

Click Network > Wireless LAN > WDS. The following screen displays.
Figure 102 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 40 Network > Wireless LAN > WDS
LABEL
Enable WDS
Security
TKIP
AES
#
Active
Remote Bridge
MAC Address
PSK
Apply
Cancel
P-2612HW Series User's Guide
DESCRIPTION
Select this option and the type of the key used to encrypt data between
APs. All the wireless APs (including the ZyXEL Device) must use the
same pre-shared key for data transmission.
If you de-select this option, the data sent between APs is not encrypted.
Anyone can read it.
Select this to use TKIP (Temporal Key Integrity Protocol) encryption.
Select this to use AES (Advanced Encryption Standard) encryption.
This is the index number of the individual WDS link.
Select this to activate the link between the ZyXEL Device and the peer
device to which this entry refers. When you do not select the check box
this link is down.
Type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Enter a Pre-Shared Key (PSK) from 8 to 63 case-sensitive ASCII
characters (including spaces and symbols).
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
Chapter 8 Wireless LAN
155