General Screen - ZyXEL Communications NBG6616 User Manual

About the NBG6616 Firewall
The NBG6616's firewall feature physically separates the LAN and the WAN and acts as a secure
gateway for all data passing between the networks.
It is a stateful inspection firewall and is designed to protect against Denial of Service attacks when
activated (click the General tab under Firewall and then click the Enable Firewall check box).
The NBG6616's purpose is to allow a private Local Area Network (LAN) to be securely connected to
the Internet. The NBG6616 can be used to prevent theft, destruction and modification of data, as
well as log events, which may be important to the security of your network.
The NBG6616 is installed between the LAN and a broadband modem connecting to the Internet.
This allows it to act as a secure gateway for all data passing between the Internet and the LAN.
The NBG6616 has one Ethernet WAN port and four Ethernet LAN ports, which are used to physically
separate the network into two areas.The WAN (Wide Area Network) port attaches to the broadband
(cable or DSL) modem to the Internet.
The LAN (Local Area Network) port attaches to a network of computers, which needs security from
the outside world. These computers will have access to Internet services such as e-mail, FTP and
the World Wide Web. However, "inbound access" is not allowed (by default) unless the remote host
is authorized to use a specific service.
Guidelines For Enhancing Security With Your Firewall
Change the default password via Web Configurator.
1
Think about access control before you connect to the network in any way, including attaching a
2
modem to the port.
Limit who can access your router.
3
Don't enable any local service (such as NTP) that you don't use. Any enabled service could present
4
a potential security risk. A determined hacker might be able to find creative ways to misuse the
enabled services to access the firewall or the network.
For local services that are enabled, protect against misuse. Protect by configuring the services to
5
communicate only with specific peers, and protect by configuring rules to block packets for the
services at specific interfaces.
Protect against IP spoofing by making sure the firewall is active.
6
Keep the firewall in a secured (locked) room.
7

17.2 General Screen

Use this screen to enable or disable the NBG6616's firewall, and set up firewall logs. Click Security
> Firewall to open the General screen.
Chapter 17 Firewall
NBG6616 User's Guide
130