22.5 Telnet Screen
To change your NBG6616's remote management settings, click Management > Remote MGMT >
Telnet to open the Telnet screen.
Figure 100 Management > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 69 Management > Remote MGMT > Telnet
LABEL
Port
Access Status
Secured Client IP
Address
Apply
Cancel
22.6 Wake On LAN Screen
Wake On LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature the remote hardware (for example the network
adapter on a computer) must support Wake On LAN using the "Magic Packet" method.
You need to know the MAC address of the remote device. It may be on a label on the device.
Chapter 22 Remote Management
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the NBG6616 using
this service.
Select All to allow all computes to access the NBG6616.
Otherwise, check Selected and specify the IP address of the computer that can
access the NBG6616.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
NBG6616 User's Guide
154