ZyXEL Communications NBG6616 User Manual page 54

Figure 37 Network > LAN > IP
The table below describes the labels in the screen.
Table 22 Network > LAN > IP
LABEL
Obtain an IP Address
Automatically
Static IP Address
IP Address
Subnet Mask
Gateway IP Address
DNS Assignment
Chapter 7 Access Point Mode
DESCRIPTION
When you enable this, the NBG6616 gets its IP address from the network's DHCP
server (for example, your ISP). Users connected to the NBG6616 can now access
the network (i.e., the Internet if the IP address is given by the ISP).
The Web Configurator may no longer be accessible unless you know the IP address
assigned by the DHCP server to the NBG6616. You need to reset the NBG6616 to
be able to access the Web Configurator again (see
details on how to reset the NBG6616).
Also when you select this, you cannot enter an IP address for your NBG6616 in the
field below.
Click this if you want to specify the IP address of your NBG6616. Or if your ISP or
network administrator gave you a static IP address to access the network or the
Internet.
Type the IP address in dotted decimal notation. The default setting is 192.168.1.2.
If you change the IP address you will have to log in again with the new IP address.
The subnet mask specifies the network number portion of an IP address. Your
NBG6616 will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the NBG6616.
Enter a Gateway IP Address (if your ISP or network administrator gave you one)
in this field.
NBG6616 User's Guide
54
Section 25.7 on page 177 for