ZyXEL Communications NBG6616 User Manual page 28

Figure 14 Wireless Security: WPA2-PSK
The following table describes the labels in this screen.
Table 10 Wireless Security: WPA2-PSK
LABEL DESCRIPTION
Wireless Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
Network Name
(SSID)
Note: The setting here applies to both 2.4 GHz and 5 GHz wireless radios.
If you change this field on the NBG6616, make sure all wireless stations use the same SSID
in order to access the network.
Security Mode Select a security level from the drop-down list box.
Note: The setting here applies to both 2.4 GHz and 5 GHz wireless radios.
Choose WPA2-PSK security to configure a Pre-Shared Key. Choose this option only if your
wireless clients support WPA2-PSK.
Wireless Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
password connection by configuring WPA in the wireless LAN screens.
Verify Password Retype the password to confirm.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.
Congratulations! Open a web browser, such as Internet Explorer, to visit your favorite website.
Note: If you cannot access the Internet when your computer is connected to one of the
NBG6616's LAN ports, check your connections. Then turn the NBG6616 off, wait for
a few seconds then turn it back on. If that does not work, log in to the web
configurator again and check you have typed all information correctly. See the
User's Guide for more suggestions.
Chapter 3 Connection Wizard
NBG6616 User's Guide
28