Nbg6616 Access And Login - ZyXEL Communications NBG6616 User Manual

If the problem continues, contact the vendor.
5

26.3 NBG6616 Access and Login

I don't know the IP address of my NBG6616.
The default IP address of the NBG6616 in Router Mode is 192.168.1.1. The default IP address of
1
the NBG6616 in Access Point Mode is 192.168.1.2.
If you changed the IP address and have forgotten it, you might get the IP address of the NBG6616
2
in Router Mode by looking up the IP address of the default gateway for your computer. To do this
in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP
address of the Default Gateway might be the IP address of the NBG6616 (it depends on the
network), so enter this IP address in your Internet browser.
If your NBG6616 in Access Point Mode is a DHCP client, you can find your IP address from the
3
DHCP server. This information is only available from the DHCP server which allocates IP addresses
on your network. Find this information directly from the DHCP server or contact your system
administrator for more information.
Reset your NBG6616 to change all settings back to their default. This means your current settings
4
are lost. See
NBG6616.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
186.
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address of the NBG6616 in Router Mode is 192.168.1.1. The default IP
address of the NBG6616 in Access Point Mode is 192.168.1.2.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
don't know the IP address of my NBG6616.
Chapter 26 Troubleshooting
Section 26.5 on page 186
(Section 12.4 on page
NBG6616 User's Guide
in the Troubleshooting for information on resetting your
108), use the new IP address.
183
Section 26.5 on page
I