Navigation Panel; Lan Screen - ZyXEL Communications NBG6616 User Manual

Table 21 Status Screen: Access Point Mode (continued)
LABEL
- Memory Usage
Interface Status
Interface
Status
Rate

7.4.1 Navigation Panel

Use the menu in the navigation panel to configure NBG6616 features in Access Point Mode.
Figure 36 Menu: Access Point Mode
Refer to Table 20 on page 46

7.5 LAN Screen

Use this section to configure your LAN settings while in Access Point Mode.
Click Network > LAN to see the screen below.
Note: If you change the IP address of the NBG6616 in the screen below, you will need to
log into the NBG6616 again using the new IP address.
Chapter 7 Access Point Mode
DESCRIPTION
This shows what percentage of the heap memory the NBG6616 is using.
This displays the NBG6616 port types. The port types are: LAN and WLAN.
For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
for descriptions of the labels shown in the navigation panel.
NBG6616 User's Guide
53