Usb Device Problems - ZyXEL Communications NBG6616 User Manual

• Position the antennas for best reception. If the AP is placed on a table or floor, point the antennas
upwards. If the AP is placed at a high position, point the antennas downwards. Try pointing the
antennas in different directions and check which provides the strongest signal to the wireless
clients.

26.7 USB Device Problems

I cannot access or see a USB device that is connected to the NBG6616.
Disconnect the problematic USB device, then reconnect it to the NBG6616.
1
Ensure that the USB device has power.
2
Check your cable connections.
3
Restart the NBG6616 by disconnecting the power and then reconnecting it.
4
If the USB device requires a special driver, install the driver from the installation disc that came
5
with the device. After driver installation, reconnect the USB device to the NBG6616 and try to
connect to it again with your computer.
If the problem persists, contact your vendor.
6
What kind of USB devices do the NBG6616 support?
It is strongly recommended to use version 2.0 or lower USB storage devices (such as memory
1
sticks, USB hard drives) and/or USB devices. Other USB products are not guaranteed to function
properly with the NBG6616.
Chapter 26 Troubleshooting
NBG6616 User's Guide
188