Malfunction Code And Defective Condition Table - Suzuki GSX-R750 Service Manual

Hide thumbs Also See for GSX-R750:
Table of Contents

Advertisement

1A-26 Engine General Information and Diagnosis:

Malfunction Code and Defective Condition Table

Malfunction
Detected Item
Code
C00
NO FAULT
C11
CMP sensor
P0340
C12
CKP sensor
P0335
C13
IAP sensor
H
P0105
L
C14
TP sensor
H
P0120
L
C15
ECT sensor
H
P0115
L
C21
IAT sensor
H
P0110
L
C22
AP sensor
H
P1450
L
Detected Failure Condition
The signal does not reach ECM for 3 sec. or
more, after receiving the starter signal.
The signal does not reach ECM for 3 sec. or
more, after receiving the starter signal.
The sensor should produce following voltage.
0.5 V ≤ Sensor voltage < 4.85 V
In other than the above range, C13 (P0105) is
indicated.
Sensor voltage is higher than specified value.
Sensor voltage is lower than specified value.
The sensor should produce following voltage.
0.2 V ≤ Sensor voltage < 4.8 V
In other than the above range, C14 (P0120) is
indicated.
Sensor voltage is higher than specified value.
Sensor voltage is lower than specified value.
The sensor voltage should be the following.
0.15 V ≤ Sensor voltage < 4.85 V
In other than the above range, C15 (P0115) is
indicated.
Sensor voltage is higher than specified value.
Sensor voltage is lower than specified value.
The sensor voltage should be the following.
0.15 V ≤ Sensor voltage < 4.85 V
In other than the above range, C21 (P0110) is
indicated.
Sensor voltage is higher than specified value.
Sensor voltage is lower than specified value.
The sensor voltage should be the following.
0.5 V ≤ Sensor voltage < 4.85 V
In other than the above range, C22 (P1450) is
indicated.
Sensor voltage is higher than specified value.
Sensor voltage is lower than specified value.
B838H21104009
Check For
CMP sensor wiring and
mechanical parts
CMP sensor, intake cam pin,
wiring/coupler connection
CKP sensor wiring and
mechanical parts
CKP sensor, lead wire/coupler
connection
IAP sensor, lead wire/coupler
connection
IAP sensor circuit shorted to
VCC or ground circuit open
IAP sensor circuit open or
shorted to ground or VCC
circuit open
TP sensor, lead wire/coupler
connection
TP sensor circuit shorted to
VCC or ground circuit open
TP sensor circuit open or
shorted to ground or VCC
circuit open
ECT sensor, lead wire/coupler
connection
ECT sensor circuit open or
ground circuit open
ECT sensor circuit shorted to
ground
IAT sensor, lead wire/coupler
connection
IAT sensor circuit open or
ground circuit open
IAT sensor circuit shorted to
ground
AP sensor, lead wire/coupler
connection
AP sensor circuit shorted to
VCC or ground circuit open
AP sensor circuit open or
shorted to ground or VCC
circuit open

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents