Suzuki GSX-R750 Service Manual page 295

Oil Pressure Regulator / Oil Strainer
1) Remove the oil pressure regulator (1).
2) Remove the oil strainer (2).
2
Oil Pump
1) Remove the oil pump (1).
2) Remove the dowel pins (2) and O-ring (3).
1
Crankcase
1) Remove the clutch push rod oil seal retainer (1).
2) Remove the upper crankcase bolts.
3) Remove the lower crankcase bolts.
4) Remove the crankshaft journal bolts (M9).
NOTE
Loosen the crankcase bolts diagonally and
smaller size ones first.
1
I837H1140091-01
2
3
I837H1140092-01
1
I837H1140093-02
5) Make sure that all of the bolts are removed. Then,
tap the sides of the lower crankcase using a plastic
hammer to separate the upper and lower crankcase
halves and then lift the lower crankcase off the upper
crankcase.
6) Remove the dowel pins and O-ring (2).
2
Balancer Shaft
Remove the balancer shaft assembly (1) and plug (2).
Engine Mechanical: 1D-51
I838H1140019-01
I837H1140095-01
I838H1140020-01
1
2
I838H1140021-01