Starter Button Inspection - Suzuki GSX-R750 Service Manual

1I-13 Starting System:
Starter Clutch
1) Install the starter driven gear onto the starter clutch.
2) Turn the starter driven gear by hand to inspect the
starter clutch for a smooth movement. The gear
turns in one direction only. If a large resistance is felt
for rotation, inspect the starter clutch or the starter
clutch contacting surface on the starter driven gear
for wear or damage.
If they are found to be damaged, replace them with
new ones.
Starter Driven Gear Bearing
Inspect the starter driven gear bearing for wear of
damage.

Starter Button Inspection

Inspect the starter button in the following procedures:
1) Remove the air cleaner box. Refer to "Air Cleaner
Box Removal and Installation in Section 1D
(Page 1D-7)".
2) Disconnect the right handlebar switch coupler (1).
3) Inspect the starter button for continuity with the
tester.
If any abnormality is found, replace the right handle
I837H1190034-01
switch assembly with a new one. Refer to
"Handlebar Removal and Installation in Section 6B
(Page 6B-2)".
Special tool
Tester knob indication
Continuity (
Color
Position
PUSH
4) After finishing the starter button inspection, reinstall
the removed parts.
I837H1190033-01
1
: 09900–25008 (Multi-circuit tester set)
)
O/W Y/G
B838H21906011
I837H1190037-01
O/R
Y/W
I815H1190019-01