Time Zone; Diagnostic; Ping - Planet ADE-4400 User Manual

Adsl 2/2+ 4-port router

Hide thumbs Also See for ADE-4400:

Table of Contents

3.7.5 Time Zone

Choose Admin > Time Zone, the page shown in the following figure appears. You can

configure the system time manually or get the system time from the time server.

The following table describes the parameters of this page:

Field

System Time

NTP Configuration

State

Server

Server2

Time Zone

In the navigation bar, click Diagnostic. The Diagnostic page that is displayed contains

Ping, ATM Loopback, ADSL and Diagnostic Test.

Choose Diagnostic > Ping. The page shown in the following figure appears.

The following table describes the parameter and button of this page:

Field

Host

Run Ping

Description

Set the system time manually.

Select enable or disable NTP function. You need to enable

NTP if you want to configure the parameters of NTP.

Set the primary NTP server manually.

Set the secondary NTP server manually.

Choose the time zone in which area you are from the drop

down list.

Description

Enter the valid IP address or domain name.

Click it to start to Ping.

Table of Contents