Planet ADE-4400 User Manual page 22

Field Description
Select the method of encapsulation provided by your ISP. You can
Encapsulation
select LLC/SNAP or VC-Mux.
Select the WAN connection type. You can select 1483 Bridged, 1483
Channel
MER, PPP over Ethernet (PPPoE), PPP over ATM (PPPoA), or 1483
Mode
Routed. In this example, PPPoE is selected.
Enter the username and password for PPP dial-up, which are provided
PPP Settings
by your ISP.
Default Route You can select Enable or Disable.
 Obtain DNS Automatically: IP address is assigned by the office
 Use the following DNS server address: If you want to enter the
DNS Settings
After finishing the configuration, click NEXT. The page shown in the following figure
appears.
1483 Routed
In the Setup WAN Interface page, enter the correct PVC, set the channel mode to 1483
Routed.
reserved for local management of ATM traffic).
end automatically. You need not to enter the IP address.
DNS server address manually, select it and enter the IP addresses
of primary DNS and secondary DNS.
22