Planet ADE-4400 User Manual page 29

The following table describes the parameters of this page:
Field
DHCP Mode
IP Pool Range
Show Client
Default Gateway
Max Lease Time
Domain Name
DNS Server
Click Show Client in the DHCP Mode page, the page shown in the following figure
appears. You can view the IP address assigned to each DHCP client.
Description
If set to DHCP Server, the router can assign IP addresses, IP
default gateway and DNS Servers to the host in Windows95,
Windows NT and other operation systems that support the
DHCP client.
It specifies the first and the last IP address in the IP address
pool. The router assigns IP address that is in the IP pool range
to the host.
Click it, the Active DHCP Client Table appears. It shows IP
addresses assigned to clients.
Enter the default gateway of the IP address pool.
The lease time determines the period that the host retains the
assigned IP addresses before the IP addresses change.
Enter the domain name if you know. If you leave this blank, the
domain name obtained by DHCP from the ISP is used. You
must enter host name (system name) on each individual PC.
The domain name can be assigned from the router through the
DHCP server.
Enter the DNS Server if you know, the default is router's IP.
29