Ipv6 Lan Config - Planet ADE-4400 User Manual

The following table describes the parameters of this page:
Field
IP Address
Subnet Mask
Secondary IP
Link Speed/Duplex Mode
ETHERNET Status Table
MAC Address Control
New MAC Address
Current Allowed
Address Table

3.4.1.2 IPv6 LAN Config

This page is used to configure the ipv6 Lan setting. You can set Lan RA server work mode
and Lan DHCPv6 server work mode.
The following table describes the RA setting parameters of this page:
Description
Enter the IP address of LAN interface. It is
recommended to use an address from a block that
is reserved for private use. This address block is
192.168.1.1- 192.168.255.254.
Enter the subnet mask of LAN interface. The
range of
255.255.0.0-255.255.255.254.
Select it to enable the secondary LAN IP address.
The two LAN IP addresses must be in the different
network.
Select the Link Speed/Duplex Mode which you
need.
This table will show the current link mode for every
port.
If you want to use the MAC address control
feature, select it and add the MAC address.
Add the MAC address which you want can access
the router via the LAN port.
MAC This table will show the current allowed MAC
address .
27
subnet mask is from