Planet ADE-4400 User Manual page 30

The following table describes the parameters and buttons in this page:
Field
IP Address
MAC Address
Expired (s)
Refresh
Close
Click Set VendorClass IP Range in the DHCP Mode page, the page shown in the
following figure appears. You can view the IP address assigned to each DHCP client. The
following table describes the parameters and buttons in this page:
Field
Device Name
Start Address
End Address
Router Address
Option60
In the DHCP Mode field, choose None. The page shown in the following figure appears.
Description
It displays the IP address assigned to the DHCP client from the
router.
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address. The MAC
address is assigned at the factory and it consists of six pairs of
hexadecimal character, for example, 00-A0-C5-00-02-12.
It displays the lease time. The lease time determines the period
that the host retains the assigned IP addresses before the IP
addresses change.
Click it to refresh this page.
Click it to close this page.
Description
You can set the device name on this item.
The IP address range start address.
The IP address range end address.
Set the router address on this item
Type the Option60 value.
30