Planet ADE-4400 User Manual page 21

Field Description
Default Route You can select Enable or Disable.
 Obtain DNS Automatically: IP address is assigned by the office
 Use the following DNS server address: If you want to enter the
DNS Settings
After finishing the configuration, click NEXT. The page shown in the following figure
appears.
PPPoE/PPPoA
In the Setup WAN Interface page, enter the correct PVC, set the channel mode to
PPPoE or PPPoA.
The following table describes the parameters of this page:
Field Description
 VPI: Virtual Path Identifier (VPI) is the virtual path between two
PVC Settings
 VCI: Virtual Channel Identifier (VCI) is the virtual channel between
end automatically. You need not to enter the IP address.
DNS server address manually, select it and enter the IP addresses of
primary DNS and secondary DNS.
points in an ATM network, ranging from 0 to 255.
two points in an ATM network, ranging from 32 to 65535 (0 to 31 is
21