Planet ADE-4400 User Manual page 19

The following table describes the parameters of this page:
Field
State
Server IP
Interval
Time Zone
GMT time
After finishing the configuration, click NEXT. The page shown in the following figure
appears.
There are five channel modes, the following describes them respectively.
1483 Bridged
In the Setup WAN Interface page, enter the correct PVC, set the channel mode to 1483
Bridged.
Click NEXT, and the page shown in the following figure appears.
Description
You can disable or enable NTP function. You have to enable it if
you want to configure the parameters of this page.
Enter the IP address of the specified time server manually.
Set the interval that the router obtains the time from the time
server. That is, the interval that the router verifies the time with
the server.
Choose the time zone in which area you are from the drop down
list.
It displays the Greenwich Mean Time (GMT).
19