HYOSUNG Aquila 250 Service Manual page 86

◉ MAGNETO ROTOR
● Fit the key in the key slot on the crankshaft.
● With the magneto rotor install the starter clutch, it
install the crankshaft.
● Apply a small quantity of THREAD LOCK "1324"to
the threaded parts of crankshaft.
THREAD LOCK "1324"
● Tighten the magneto rotor nut to the specified torque.
Conrod holder : 09910-20115
Magneto rotor nut
: 50~60 N∙m(5.0~6.0 kg∙m)
◉ STARTER IDLE GEAR AND MOTOR
● Install the starter idle gear, shaft and spacer.
● Install the starter motor.
ENGINE 3-48