Table of Contents
Advertisement
CAUTION
� Mark an identification of assembly location on each removed part so that each will be
restored to the original position during reassembly.
� Wash clean and dry the removed parts before inspecting and measuring.
� Oil the rotating or sliding parts before assembly.
� Make sure to use the correct type of lubricant where specified.
� Check that each rotating or sliding part moves or operates smoothly after assembly.
� Make sure to follow the bolt tightening order where specified.
� If the correct length of the bolt is confused when tightening the crankcase or cover, insert all
the bolts and check that the tightening margin is equal in each bolt.
ENGINE
CONTENTS
3 - 1
3 - 1
3
3 - 6
3 - 8
3 - 8
3 - 9
3 - 13
3 - 14
3 - 14
3 - 15
3 - 16
3 - 17
3 - 17
3 - 18
3 - 20
3 - 39
- Quick Links:
- Electrical System
Hide quick links:
Advertisement
Chapters
Table of Contents
