HYOSUNG Aquila 250 Service Manual page 72

ENGINE 3-34
◉ CLUTCH RELEASE BEARING
Inspect the clutch release bearing for any abnormality,
especially cracks. When removing the bearing from the
clutch, decide whether it can be reused or if it should be
replaced.
Smooth engagement and disengagement of the clutch
depends on the condition of this bearing.
◉ PRIMARY DRIVEN GEAR
Inspect the primary driven gear bearing for any damage.
If any abnormal condition are found, replace the primary
driven gear.
◉ OIL PUMP
Turn the oil pump shaft and check that rotation is
smooth. If any abnormal condition is found, replace the
oil pump with new one.
◉ GEARSHIFT SHAFT
Disassemble and reassemble the gearshift shaft as
shown in right picture.