HYOSUNG Aquila 250 Service Manual page 150

◉ INSPECTION
� FRONT FORK SPRING
Measure the free length of the front fork spring �.
If the length is found shorter than the service limit,
replace the spring.
Front fork spring free length �
� INNER TUBE AND OUTER TUBE
Check the sliding of the inner tube, outer tube and
damper rod ring for scratch, wear, bending, or other
abnormal condition.
◉ REASSEMBLY
Perform the reassembly and remounting work in the reverse order of the disassembly and removal procedures while
observing the following instructions.
CAUTION
� Thoroughly wash all the component parts being assembled.
Insufficient washing can result in oil leakage or premature wear of the parts.
� When reassembling the front fork, use new fork oil.
� Use the specified fork oil for the front fork.
� When reassembling, replace the slide metals, oil seal, dust seal and damper rod bolt gasket with new ones.
● On the inner tube, assemble the following parts.
① Dust seal
② Oil seal stopper ring
③ Oil seal
④ Oil seal retainer
⑤ Slide metal
⑥ Guide bushing
CAUTION
To prevent the lip of oil seal ③ from being dam-
aged, cover the inner tube with vinyl sheet � dur-
ing installation.
Service limit
356 mm
�
�
⑤
⑥
CHASSIS 6-22
①
②
③
④