● Apply SUPER GREASE "A"to the brake lever pivot.
SUPER GREASE " A "
● When remounting the master cylinder onto the han-
dlebars, align the master cylinder holder' s mating
surface ① with punch mark ② on the handlebar and
tighten the upper clamp bolt first.
Front brake master cylinder mounting bolt
● Install the brake hose union, tighten the union bolt to
the specified torque.
Front brake hose union bolt
: 20~25 N∙m (2.0 ~2.5 kg∙m)
CAUTION
Bleed air from the brake system after reassem-
bling the master cylinder. (Refer to page 2-16)
: 5~8 N∙m (0.5 ~0.8 kg∙m)
Master cylinder
Upper
clamp
bolt
Handlebar
Clearance
CHASSIS 6-16
①
②